GlobeNewswire Inc | Oct 20, 2021 06:45AM EDT

October 20, 2021

-- Quarter-end Backlog increases 26.5% to $125.1 million versus $98.9 million at end of Q2 2021 -- Q3 2021 Sales are $37.2 million; Premium alloy sales are 16.0% of sales -- Q3 2021 Gross margin improves to 6.2% of sales from 5.6% in Q2 2021 -- Q3 2021 Net income of $7.9 million, or $0.87 per diluted share, includes $10 million gain on PPP loan forgiveness. Net loss is $2.1 million, or $0.23 per diluted share, before PPP gain, versus loss of $2.5 million, or $0.28 per diluted share, in Q2 2021 -- Q3 2021 EBITDA is $12.1 million including PPP gain; Adjusted EBITDA is $3.8 million

BRIDGEVILLE, Pa., Oct. 20, 2021 (GLOBE NEWSWIRE) -- Universal Stainless & Alloy Products, Inc. (Nasdaq: USAP) today reported net sales for the third quarter of 2021 of $37.2 million, 3.5% lower than $38.5 million in the second quarter of 2021, and in line with $37.4 million in the third quarter of 2020.

Sales of premium alloys in the third quarter of 2021 were $5.9 million, or 16.0% of sales, compared with $5.9 million, or 15.3% of sales, in the second quarter of 2021, and $9.2 million, or 24.5% of sales, in the third quarter of 2020. The Companys premium alloy products are primarily sold to the aerospace end market. More than 20% of the total backlog at the end of the third quarter is premium alloy product.

The Company's gross margin increased in the third quarter to $2.3 million, or 6.2% of sales, from $2.2 million, or 5.6% of sales, in the second quarter of 2021, and a loss of $4.4 million, or (11.8%) of sales in the third quarter of 2020. The sequential increase in the third quarter 2021 gross margin reflects higher production levels and correspondingly lower fixed charges. Gross margin amounts included fixed cost absorption charges of $1.5 million, $2.1 million, and $4.3 million in each respective period.

Chairman, President and CEO Dennis Oates commented: Our backlog of $125.1 million reached the highest level since the first quarter of 2019 on continued strong order entry. We booked $58 million of new orders during the third quarter, following up on record bookings last quarter. Profitability continued to improve as measured by an expanding gross margin. Like many industrial businesses, we were faced with supply chain challenges and labor shortages which moderated sales growth during the quarter.

Despite those headwinds, recovery in the aerospace market, our largest end market, continued on pace and was driven by further improvement in commercial air travel and ongoing defense spending. Our third quarter aerospace sales increased 4.4% sequentially and represented 60% of total sales. Aerospace was also the main driver of our third quarter bookings growth. Delivery of these products is scheduled to begin in the fourth quarter and continue into the first half of 2022 and beyond. Projected airplane build-rate increases, continued travel growth and reasonable defense spending next year will accelerate the pull of metal through the supply chain.

Our sales to the oil & gas market also increased from the second quarter, rising 2.6%, and represented 11% of sales. With oil prices at a seven-year high and natural gas prices up about 50% in the third quarter alone, drilling activity is poised for further recovery. On October 8, Baker Hughes reported that the U.S. added 264 drilling rigs over the past year while international rig counts were up by 85.

The growth in aerospace and oil and gas sales was offset by lower sales in the balance of our end markets versus the second quarter. Heavy equipment market sales were off 18% sequentially but were 63% higher than the third quarter last year as plate demand demonstrated its typical volatility despite the ongoing recovery in industrial businesses. Heavy equipment remained our second largest market. Sales to the power generation and general industrial markets also were lower following strong sequential improvement in the second quarter.

We continue to benefit from positive operating leverage as activity levels rise. Substantial increases in raw material costs and general inflationary trends in key inputs are being offset by our surcharges and base price increases.

We are focused on restoring our profitability and controlling working capital as operations ramp up to meet our rapidly growing backlog. Third quarter results are further evidence of progress in this effort. We are also commissioning a new vacuum arc re-melting furnace and installing expanded vacuum induction melting capability designed to support the growth of premium products and continuously improve the efficiency of our melt operations. Our balance sheet remains strong to support our strategic initiatives.

Mr. Oates concluded: While current supply chain challenges will likely persist, we remain determined to make further progress in the fourth quarter and take full advantage of our recovering markets, especially aerospace, as we move into 2022. We will continue to rely on the commitment of our team, the support of our customers and our focus on providing critical products to our markets to do so.

Quarterly and Year-to-Date Results of Operations

For the first nine months of 2021, net sales totaled $112.7 million compared with $148.4 million in the same period of 2020. Sales of premium alloys were $19.4 million, or 17.2% of sales, in the first nine months of 2021, compared with $29.3 million, or 19.7% of sales, in same period of 2020.

Net income for the third quarter of 2021 was $7.9 million, or $0.87 per diluted share, and included a gain of $10 million due to forgiveness of a term note from the Paycheck Protection Program (PPP) in July, as previously reported. Before the PPP gain, the net loss for the third quarter of 2021 was $2.1 million, or $0.23 per diluted share, compared with a net loss of $2.5 million, or $0.28 per diluted share, in the second quarter of 2021, and a net loss of $7.0 million, or $0.79 per diluted share, in the third quarter of 2020. There were fixed cost absorption charges of $1.5 million, $2.1 million, and $4.3 million in each respective period. For the first nine months of 2021, net income was $0.9 million, or $0.10 per diluted share, including the PPP gain. In the first nine months of 2020, the net loss was $11.7 million, or $1.33 per diluted share.

The Companys EBITDA for the third quarter of 2021 was $12.1 million including the $10 million PPP gain; Adjusted EBITDA was $3.8 million.

Managed working capital was $124.4 million at September 30, 2021 compared with $116.0 million at June 30, 2021, and $133.3 million at the end of the third quarter of 2020. Inventory was $135.6 million at the end of the third quarter of 2021, compared with $120.8 million at the end of the second quarter of 2021, and $120.9 million at the end of the 2020 third quarter. The increase in inventory in the most recent quarter reflects higher raw material prices, robust raw material purchases to mitigate supply disruptions, and increased work in process to support backlog growth.

Backlog (before surcharges) increased 26.5% to $125.1 million at September 30, 2021 from $98.9 million at June 30, 2021 and increased 128.2% from $54.8 million at the end of the third quarter of 2020.

The Companys total debt at September 30, 2021 was $51.5 million, compared with $53.0 million at June 30, 2021, and $60.6 million at September 30, 2020.

Capital expenditures for the third quarter of 2021 totaled $2.0 million, compared with $1.8 million for the second quarter of 2021, and $1.3 million in the third quarter of 2020. All capital projects in process continue to be generally on time and within budget. The Company continues to expect capital expenditures in 2021 to approximate $11.0 million to support its strategic growth initiatives.

Conference Call and Webcast

The Company has scheduled a conference call for today, October 20th, at 10:00 a.m. (Eastern) to discuss third quarter 2021 results. Those wishing to listen to the live conference call via telephone should dial 706-679-0668, passcode 9394716. A simultaneous webcast will be available on the Companys website at www.univstainless.com, and thereafter archived on the website through the end of the fourth quarter of 2021.

About Universal Stainless & Alloy Products, Inc.

Universal Stainless & Alloy Products, Inc., established in 1994 and headquartered in Bridgeville, PA, manufactures and markets semi-finished and finished specialty steels, including stainless steel, nickel alloys, tool steel and certain other alloyed steels. The Company's products are used in a variety of industries, including aerospace, power generation, oil and gas, and heavy equipment manufacturing. More information is available at www.univstainless.com.

Forward-Looking Information Safe Harbor

Except for historical information contained herein, the statements in this release are forward-looking statements that are made pursuant to the safe harbor provision of the Private Securities Litigation Reform Act of 1995. Forward-looking statements involve known and unknown risks and uncertainties that may cause the Companys actual results in future periods to differ materially from forecasted results. Those risks include, among others, the Companys ability to maintain its relationships with its significant customers and market segments; the Companys response to competitive factors in its industry that may adversely affect the market for finished products manufactured by the Company or its customers; the Companys ability to compete successfully with domestic and foreign producers of specialty steel products and products fashioned from alternative materials; changes in overall demand for the Companys products and the prices at which the Company is able to sell its products in the aerospace industry, from which a substantial amount of our sales is derived; the Companys ability to develop, commercialize, market and sell new applications and new products; the receipt, pricing and timing of future customer orders; the impact of changes in the Companys product mix on the Companys profitability; the Companys ability to maintain the availability of raw materials and operating supplies with acceptable pricing; the availability and pricing of electricity, natural gas and other sources of energy that the Company needs for the manufacturing of its products; risks related to property, plant and equipment, including the Companys reliance on the continuing operation of critical manufacturing equipment; the Companys success in timely concluding collective bargaining agreements and avoiding strikes or work stoppages; the Companys ability to attract and retain key personnel; the Companys ongoing requirement for continued compliance with laws and regulations, including applicable safety and environmental regulations; the ultimate outcome of the Companys current and future litigation matters; the Companys ability to meet its debt service requirements and to comply with applicable financial covenants; risks associated with conducting business with suppliers and customers in foreign countries; public health issues, including COVID-19 and its uncertain impact on our facilities and operations and our customers and suppliers and the effectiveness of the Companys actions taken in response to these risks; risks related to acquisitions that the Company may make; the Companys ability to protect its information technology infrastructure against service interruptions, data corruption, cyber-based attacks or network security breaches; the impact on the Companys effective tax rates from changes in tax rules, regulations and interpretations in the United States and other countries where it does business; and the impact of various economic, credit and market risk uncertainties. Many of these factors are not within the Companys control and involve known and unknown risks and uncertainties that may cause the Companys actual results in future periods to be materially different from any future performance suggested herein. Any unfavorable change in the foregoing or other factors could have a material adverse effect on the Companys business, financial condition and results of operations. Further, the Company operates in an industry sector where securities values may be volatile and may be influenced by economic and other factors beyond the Companys control. Certain of these risks and other risks are described in the Companys filings with the SEC, including the Companys Annual Report on Form 10-K for the year ended December 31, 2020, copies of which are available from the SEC or may be obtained upon request from the Company.

Non-GAAP Financial Measures

This press release includes discussions of financial measures that have not been determined in accordance with U.S. Generally Accepted Accounting Principles (GAAP). These measures include earnings (loss) before interest, income taxes, depreciation and amortization (EBITDA) and Adjusted EBITDA. We include these measurements to enhance the understanding of our operating performance. We believe that EBITDA, considered along with net earnings (loss), is a relevant indicator of trends relating to cash generating activity of our operations. Adjusted EBITDA excludes the effect of share-based compensation expense and noted special items such as impairments and costs or income related to special events such as periods of low activity or insurance claims. We believe that excluding these costs provides a consistent comparison of the cash generating activity of our operations. We believe that EBITDA and Adjusted EBITDA are useful to investors as they facilitate a comparison of our operating performance to other companies who also use EBITDA and Adjusted EBITDA as supplemental operating measures. These non-GAAP financial measures supplement our GAAP disclosures and should not be considered an alternative to the GAAP measures. These non-GAAP measures may not be entirely comparable to similarly titled measures used by other companies due to potential differences among calculation methodologies. A reconciliation of these non-GAAP financial measures to their most directly comparable financial measure prepared in accordance with GAAP is included in the tables that follow.

[TABLES FOLLOW]

UNIVERSAL STAINLESS & ALLOY PRODUCTS, INC.FINANCIAL HIGHLIGHTS(Dollars in Thousands, Except Per Share Information)(Unaudited)

CONSOLIDATED STATEMENTS OF OPERATIONS Three months ended Nine months ended September 30, September 30, 2021 2020 2021 2020 Net sales $ 37,169 $ 37,434 $ 112,709 $ 148,407 Cost of 34,862 41,861 108,486 145,988 products sold Gross margin 2,307 (4,427 ) 4,223 2,419 Selling,general and 5,010 4,153 15,392 15,458 administrativeexpenses Operating loss (2,703 ) (8,580 ) (11,169 ) (13,039 ) Interest 483 586 1,413 2,232 expenseDeferredfinancing 56 56 168 169 amortizationGain onextinguishment (10,000 ) - (10,000 ) - of debtOther expense 9 (288 ) 32 (302 )(income), net Income (loss)before income 6,749 (8,934 ) (2,782 ) (15,138 )taxes Income taxes (1,141 ) (1,934 ) (3,650 ) (3,396 ) Net income $ 7,890 $ (7,000 ) $ 868 $ (11,742 )(loss) Net income(loss) per $ 0.88 $ (0.79 ) $ 0.10 $ (1.33 )common share -BasicNet income(loss) per $ 0.87 $ (0.79 ) $ 0.10 $ (1.33 )common share -Diluted Weightedaverage sharesof common stockoutstanding:Basic 8,917,858 8,829,732 8,902,484 8,813,880 Diluted 9,082,371 8,829,732 9,050,847 8,813,880

MARKET SEGMENT INFORMATION Three months ended Nine months ended September 30, September 30, Net Sales 2021 2020 2021 2020 Service $ 26,333 $ 25,983 $ 80,185 $ 103,877 centersOriginalequipment 3,336 4,405 10,916 16,624 manufacturersRerollers 4,722 3,173 13,629 13,612 Forgers 2,518 3,451 7,012 12,027 Conversionservices and 260 422 967 2,267 other Total net $ 37,169 $ 37,434 $ 112,709 $ 148,407 sales Tons shipped 6,144 6,046 20,460 25,153 MELT TYPE INFORMATION Three months ended Nine months ended September 30, September 30, Net Sales 2021 2020 2021 2020 Specialty $ 30,973 $ 27,847 $ 92,359 $ 116,869 alloysPremium 5,936 9,165 19,383 29,271 alloys ^*Conversionservices and 260 422 967 2,267 other sales Total net $ 37,169 $ 37,434 $ 112,709 $ 148,407 sales END MARKET INFORMATION ** Three months ended Nine months ended September 30, September 30, Net Sales 2021 2020 2021 2020 Aerospace $ 22,253 $ 25,138 $ 65,798 $ 104,686 Power 847 1,590 3,453 5,923 generationOil & gas 4,041 2,755 11,045 10,778 Heavy 7,614 4,662 24,967 16,364 equipmentGeneralindustrial,conversion 2,414 3,289 7,446 10,656 services andother Total net $ 37,169 $ 37,434 $ 112,709 $ 148,407 sales * Premium alloys represent all vacuum induction melted (VIM) products.**The majority of our products are sold toservice centers rather than the ultimate endmarket customers. The end market information inthis press release is our estimate based upon our knowledge of our customers and the grade ofmaterial sold to them, which they will in-turnsell to the ultimate end market customer.

CONDENSED CONSOLIDATED BALANCE SHEETS September December 31, 30, 2021 2020 Assets Cash $ 79 $ 164 Accounts receivable, net 19,712 18,101 Inventory, net 135,604 111,380 Other current assets 5,261 7,471 Total current assets 160,656 137,116 Property, plant and equipment, net 159,348 164,983 Other long-term assets 950 947 Total assets $ 320,954 $ 303,046 Liabilities and Stockholders' Equity Accounts payable $ 29,949 $ 12,632 Accrued employment costs 4,781 1,826 Current portion of long-term debt 2,408 16,713 Other current liabilities 974 2,722 Total current liabilities 38,112 33,893 Long-term debt, net 49,126 33,471 Deferred income taxes 2,089 5,725 Other long-term liabilities, net 4,082 4,277 Total liabilities 93,409 77,366 Stockholders? equity 227,545 225,680 Total liabilities and stockholders? equity $ 320,954 $ 303,046

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOW Nine months ended September 30, 2021 2020 Operating activities: Net income (loss) $ 868 $ (11,742 )Adjustments for non-cash items: Depreciation and amortization 14,419 14,721 Gain on extinguishment of debt (10,000 ) - Deferred income tax (3,646 ) (3,380 )Share-based compensation expense 833 1,129 Changes in assets and liabilities: Accounts receivable, net (1,611 ) 9,144 Inventory, net (25,500 ) 25,093 Accounts payable 16,525 (25,399 )Accrued employment costs 2,955 (1,214 )Income taxes 5 207 Other 281 4,045 Net cash (used in) provided by (4,871 ) 12,604 operating activities Investing activity: Capital expenditures (6,514 ) (8,480 ) Net cash used in investing activity (6,514 ) (8,480 ) Financing activities: Borrowings under revolving credit 89,070 101,559 facilityPayments on revolving credit facility (69,804 ) (112,498 )Proceeds from term loan facility 8,571 - Proceeds from Paycheck Protection - 10,000 Program NotePayments on term loan facility, (16,116 ) (3,383 )finance leases, and notesIssuance of common stock under 118 86 share-based plansPayments of financing costs (539 ) - Net cash provided by (used in) 11,300 (4,236 )financing activities Net decrease in cash (85 ) (112 )Cash at beginning of period 164 170 Cash at end of period $ 79 $ 58

RECONCILIATION OF NET LOSS TO EBITDA AND ADJUSTED EBITDA Three months ended Nine months ended September 30, September 30, 2021 2020 2021 2020 Net income $ 7,890 $ (7,000 ) $ 868 $ (11,742 )(loss)Interest 483 586 1,413 2,232 expenseIncome taxes (1,141 ) (1,934 ) (3,650 ) (3,396 )Depreciationand 4,841 4,732 14,419 14,721 amortizationEBITDA 12,073 (3,616 ) 13,050 1,815 Share-basedcompensation 252 295 831 1,129 expenseFixed costabsorption 1,491 4,264 6,144 4,465 direct chargeLoss on saleof excess - - - 354 scrapEmployeeseverance - - - 620 costsGain onextinguishment (10,000 ) - (10,000 ) - of debtInsurance - (307 ) - (307 )benefitAdjusted $ 3,816 $ 636 $ 10,025 $ 8,076 EBITDA

CONTACTS: Dennis M. Oates June Filingeri Chairman, President President and CEO Comm-Partners LLC (412) 257-7609 (203) 972-0186