Business Wire | Jun 10, 2021 05:00PM EDT

New Gold Provides New Afton Exploration Update

Jun. 10, 2021

TORONTO--(BUSINESS WIRE)--Jun. 10, 2021--June 10, 2021-- New Gold Inc. ("New Gold" or the "Company") (TSX and NYSE American: NGD) is pleased to provide an update on exploration activities at its New Afton Mine.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20210610005891/en/

Figure 1: Long section looking southeast showing AI targets and traces of 2021 drill holes completed. (Graphic: Business Wire)

Exploration activities at New Afton are focused on underground drilling targeting new porphyry copper-gold mineralization defined within the New Afton deposit footprint as identified through an Artificial Intelligence (AI) study in 2020. In addition, surface exploration drilling is underway targeting new porphyry copper-gold grade mineralization along the prospective Cherry Creek trend located three kilometres west of the New Afton mill.

Highlights

* Underground exploration drilling on the AI West target, located approximately 500 meters west of the B3 block cave reserve, returned 25.2 g/t gold over 2 metres; 0.39 g/t gold and 0.19% copper over 16 metres; 0.34 g/t gold and 0.18% copper over 34 metres; 0.97 g/t gold and 1.27% copper over 8 metres; 0.36 g/t gold and 0.19% copper over 16 metres; 2.72 g/t gold and 0.25% copper over 4 metres and 3.35 g/t gold and 0.64% copper over 6 metres (see Table 2 for full drilling results). * Surface exploration drilling on the Cherry Creek trend returned 21 g/t gold over 1 metre (see Table 4 for full drilling results).

AI Targets

In March 2021, an underground drilling program commenced to test three targets generated within the New Afton deposit footprint based on an AI study completed in 2020. The underground AI targets were defined with the support of all available drill hole geochemical data within the New Afton deposit footprint (353 drill holes). Geochemical wireframes were created by an external consulting firm using their artificial intelligence proprietary software. Targeting involved the selection of AI derived wireframes that were consistent with the New Afton deposit mineralization vectors. Final drill targets were further refined where coincidental vectors from multiple wireframes overlap.

These targets are identified as AI West, AI Southeast and AI North, based upon their location relative to the main New Afton ore body (Figure 1).

AI West Target

Three drill holes totaling 1,157 metres have been completed in 2021. Following completion of the three drill holes, two holes drilled for geotechnical purposes in 2019 were logged and sampled to further assess the extension of the mineralization identified in the AI West target. Results interpretation defined two distinct zones of mineralization: a structurally related high-grade gold zone (Figure 2) and a porphyry style mineralization disseminated gold-copper zone within altered volcanics (Figure 3).

Two additional drill holes are planned to be completed this quarter to test the continuity of both the porphyry mineralization along the picrite contact and the high-grade gold bearing structure.

Drill result highlights at West AI target are as follows (see Table 1 at the end of this news release for drill hole collar coordinates and Table 2 for full drilling results):

* Hole EA21-289 returned 6 metres at 1.06 g/t gold from 32 to 38 metres; 2 metres at 0.87 g/t gold and 1.25% copper from 242 to 244 metres; and 34 metres at 0.34 g/t gold and 0.18% copper from 328 to 362 metres. * Hole EA19-268 returned 8 metres at 0.97 g/t gold and 1.27% copper from 16 to 24 metres; 16 metres at 0.36 g/t gold and 0.19% copper from 420 to 436 metres; 4 metres at 2.72 g/t gold and 0.25% copper from 550 to 554 metres; 6 metres at 3.35 g/t gold and 0.64% copper from 612 to 618 metres; and 12 metres at 1.15 g/t gold from 638 to 650 metres. * Hole EA19-267 returned 2 metres at 25.2 g/t gold from 33 to 35 metres; 21 metres at 0.25 gold g/t and 0.24% copper from 98 to 119 metres; 16 metres at 0.39 g/t gold and 0.19% copper from 360 to 376 metres.

AI North Target

Four drill holes have been completed at the AI North target totaling 1,456 metres. Assay results are pending. Two drill holes intercepted 70 metres of pervasive phyllic alteration (Figure 4) located 350 metres outbound from the phyllic halo surrounding the New Afton mineralization. The intense alteration zone warrants follow-up exploration drilling once all data has been interpreted. C-Zone mine development is underway which will allow for the establishment of drill bays that will provide a more efficient angle and proximity to continue testing the AI North target (porphyry target).

AI Southeast Target

A drilling program is planned to begin July 2021 to test alteration and geochemical vectors for the potential extension of the known mineralization into the AI Southeast target.

Cherry Creek Trend

Phase 1 diamond drilling has been completed in the Cherry Creek trend area that included 20 drill holes totaling 10,519 meters (Table 3). Assay results from the final three drill holes have been received and support porphyry target vectors from historic interpretation and confirm historical high-grade gold intercepts within the area that were not National Instrument 43-101 - Standards of Disclosure for Mineral Projects ("NI 43-101") compliant. Drill hole CC21-018 intersected 21 g/t gold over 1 metre interval (from 683 to 684 metre down hole) hosted in silica-fuchsite-pyrite and minor chalcopyrite altered quartz-carbonate-muscovite schist within the Cherry Creek shear zone. This high-grade gold mineralization may represent a new deposit type.

Phase 2 follow-up diamond drilling is underway. Drill hole CC21-021, 700 metre east of drill hole CC21-018 (825 metre depth), targeting high-grade gold mineralization within the picrite bounded schist along the Cherry Creek shear zone has been completed and assay results are pending.

A second Phase 2 follow-up drill hole is currently being drilled approximately one kilometre northwest of Silica Hill, targeting porphyry mineralization at the picrite inflection and is expected to be completed in June 2021.

The planned Phase 2 drilling program will test several additional targets along the Cherry Creek trend including gold-copper porphyry, shear zone hosted high-grade gold, and near surface epithermal mineralization styles.

About New Gold Inc.

New Gold is a Canadian-focused intermediate gold mining company with a portfolio of two core producing assets in Canada, the Rainy River gold mine, and the New Afton copper-gold mine. The Company also holds an 8% gold stream on the Artemis Gold Blackwater project located in Canada, a 6% equity stake in Artemis, and other Canadian-focused investments. The Company also owns the Cerro San Pedro Mine in Mexico (in reclamation). New Gold's vision is to build a leading diversified intermediate gold company based in Canada that is committed to the environment and social responsibility. For further information on the Company, visit www.newgold.com.

Cautionary Note Regarding Forward-Looking Statements

Certain information contained in this news release, including any information relating to New Gold's future financial or operating performance are "forward-looking". All statements in this news release, other than statements of historical fact, which address events, results, outcomes or developments that New Gold expects to occur are "forward-looking statements". Forward-looking statements are statements that are not historical facts and are generally, but not always, identified by the use of forward-looking terminology such as "plans", "expects", "is expected", "budget", "scheduled", "targeted", "estimates", "forecasts", "intends", "anticipates", "projects", "potential", "believes" or variations of such words and phrases or statements that certain actions, events or results "may", "could", "would", "should", "might" or "will be taken", "occur" or "be achieved" or the negative connotation of such terms. Forward-looking statements in this news release include, among others, statements with respect to: the completion of two additional drill holes in the AI West target; the Company's C-Zone development plans; the anticipated benefits resulting from the establishment of drill bays; the Company's planned drilling program with respect to the AI Southeast target and the timing thereof; a potentially new deposit type within the Chery Creek trend; timing expectations regarding the completion of the second Phase 2 follow-up drill hole; and the Company's plans for the Phase 2 drilling program in the Cherry Creek trend area.

All forward-looking statements in this news release are based on the opinions and estimates of management that, while considered reasonable as at the date of this news release in light of management's experience and perception of current conditions and expected developments, are inherently subject to important risk factors and uncertainties, many of which are beyond New Gold's ability to control or predict. Certain material assumptions regarding such forward-looking statements are discussed in this news release, New Gold's latest annual management's discussion and analysis ("MD&A"), its most recent annual information form for the year ended December 31, 2020 ("Annual Information Form") and technical reports on the Rainy River Mine and New Afton Mine filed on SEDAR at www.sedar.com and on EDGAR at www.sec.gov. In addition to, and subject to, such assumptions discussed in more detail elsewhere, the forward-looking statements in this news release are also subject to the following assumptions: (1) there being no significant disruptions affecting New Gold's operations other than as set out herein; (2) political and legal developments in jurisdictions where New Gold operates, or may in the future operate, being consistent with New Gold's current expectations; (3) the accuracy of New Gold's current mineral reserve and mineral resource estimates; (4) the exchange rate between the Canadian dollar and U.S. dollar, and to a lesser extent, the Mexican Peso, being approximately consistent with current levels; (5) prices for diesel, natural gas, fuel oil, electricity and other key supplies being approximately consistent with current levels; (6) equipment, labour and materials costs increasing on a basis consistent with New Gold's current expectations; (7) arrangements with First Nations and other Aboriginal groups in respect of the New Afton Mine being consistent with New Gold's current expectations; (8) all required permits, licenses and authorizations being obtained from the relevant governments and other relevant stakeholders within the expected timelines; (9) there being no significant disruptions to the Company's workforce at the New Afton Mine due to cases of COVID-19 or any required self-isolation requirements (due, among other things, to cross-border travel to the United States or any other country); (10) the responses of the relevant governments to the COVID-19 outbreak being sufficient to contain the impact of the COVID-19 outbreak; and (11) the long-term economic effects of the COVID-19 outbreak not having a material adverse impact on the Company's operations or liquidity position

Forward-looking statements are necessarily based on estimates and assumptions that are inherently subject to known and unknown risks, uncertainties and other factors that may cause actual results, level of activity, performance or achievements to be materially different from those expressed or implied by such forward-looking statements. Such factors include, without limitation: significant capital requirements and the availability and management of capital resources; additional funding requirements; price volatility in the spot and forward markets for metals and other commodities; fluctuations in the international currency markets and in the rates of exchange of the currencies of Canada, the United States and, to a lesser extent, Mexico; volatility in the market price of the Company's securities; hedging and investment related risks; dependence on the Rainy River Mine and New Afton Mine; discrepancies between actual and estimated production, between actual and estimated mineral reserves and mineral resources and between actual and estimated metallurgical recoveries; risks related to early production at the Rainy River Mine, including failure of equipment, machinery, the process circuit or other processes to perform as designed or intended; risks related to construction, including changing costs and timelines; adequate infrastructure; fluctuation in treatment and refining charges; changes in national and local government legislation in Canada, the United States and, to a lesser extent, Mexico or any other country in which New Gold currently or may in the future carry on business; global economic and financial conditions; risks relating to New Gold's debt and liquidity; the adequacy of internal and disclosure controls; taxation; impairment; conflicts of interest; risks relating to climate change; controls, regulations and political or economic developments in the countries in which New Gold does or may carry on business; the speculative nature of mineral exploration and development, including whether historical drill results can be confirmed in the current drilling program, the risks of obtaining and maintaining the validity and enforceability of the necessary licenses and permits and complying with the permitting requirements of each jurisdiction in which New Gold operates; the lack of certainty with respect to foreign legal systems, which may not be immune from the influence of political pressure, corruption or other factors that are inconsistent with the rule of law; the uncertainties inherent to current and future legal challenges New Gold is or may become a party to; risks relating to proposed acquisitions and the integration thereof; information systems security threats; diminishing quantities or grades of mineral reserves and mineral resources; competition; loss of, or inability to attract, key employees; rising costs of labour, supplies, fuel and equipment; actual results of current exploration or reclamation activities; uncertainties inherent to mining economic studies; changes in project parameters as plans continue to be refined; accidents; labour disputes; defective title to mineral claims or property or contests over claims to mineral properties; unexpected delays and costs inherent to consulting and accommodating rights of Indigenous groups; risks, uncertainties and unanticipated delays associated with obtaining and maintaining necessary licenses, permits and authorizations and complying with permitting requirements; disruptions to the Company's workforce at either the Rainy River Mine or the New Afton Mine, or both, due to cases of COVID-19 or any required self-isolation (due to cross-border travel, exposure to a case of COVID-19 or otherwise); the responses of the relevant governments to the COVID-19 outbreak not being sufficient to contain the impact of the COVID-19 outbreak; disruptions to the Company's supply chain and workforce due to the COVID-19 outbreak; an economic recession or downturn as a result of the COVID-19 outbreak that materially adversely affects the Company's operations or liquidity position; there being further shutdowns at the Rainy River or New Afton Mines; the Company not being able to complete its construction projects at the Rainy River Mine or the New Afton Mine on the anticipated timeline or at all; the Company not being able to complete the exploration drilling program to be launched at the Rainy River Mine and Cherry Creek on the anticipated timeline or at all; Artemis Gold Inc. not being able to make the remaining C$50 million cash payment due in connection with its acquisition of the Blackwater Project on August 24, 2021. In addition, there are risks and hazards associated with the business of mineral exploration, development and mining, including environmental events and hazards, industrial accidents, unusual or unexpected formations, pressures, cave-ins, flooding and gold bullion losses (and the risk of inadequate insurance or inability to obtain insurance to cover these risks) as well as "Risk Factors" included in New Gold's Annual Information Form, MD&A and other disclosure documents filed on and available on SEDAR at www.sedar.com and on EDGAR at www.sec.gov. Forward looking statements are not guarantees of future performance, and actual results and future events could materially differ from those anticipated in such statements. All forward-looking statements contained in this news release are qualified by these cautionary statements. New Gold expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, events or otherwise, except in accordance with applicable securities laws.

Technical Information

The scientific and technical information in this news release has been reviewed and approved by Mr. Michele Della Libera, Director Exploration of New Gold. Mr. Della Libera is a Professional Geoscientist (P.Geo.) and Practising Member of the Association of Professional Geoscientists of Ontario and the Engineers and Geoscientist of British Columbia and a "Qualified Person" as defined under NI 43-101. Mr. Della Libera has verified the data disclosed in this news release, including the exploration, analytical and testing data underlying the information. His verification included a review of the applicable assay databases and reviews of the assay certificates. No limitations were imposed on Mr. Della Libera's verification process.

New Gold maintains a Quality Assurance / Quality Control ("QA/QC") program at its New Afton Mine operation using industry best practices and is consistent with the QA/QC protocols in use at all of the Company's exploration and development projects. Key elements of New Gold's QA/QC program include chain of custody of samples, regular insertion of certified reference standards and blanks, and duplicate check assays. Drill core at New Afton is sampled commonly at 2 metres intervals or less than 2 metres upon geological changes, halved and shipped in sealed bags to Actlabs Laboratories in Kamloops, British Columbia. Additional information regarding the Company's quality assurance processes is set out in the New Afton NI 43-101 Technical Reports available at www.sedar.com.

For additional technical information on New Gold's material properties, including a detailed breakdown of Mineral Reserves and Mineral Resources by category, as well as key assumptions, parameters, and risks, refer to New Gold's Annual Information Form.

Table 1: New Afton AI Targets Drill Holes Collar Coordinates

Target UTM_North UTM_East Elevation Total Azimuth Dip Drill Depth Area Hole (m) (m) (masl) (degrees) (degrees) (m)

West EA19-267 5614659 674861 127 578.51 218.31 -30.43Target

West EA19-268 5614601 674999 102 670.56 234.57 -18.62Target

West EA21-289 5614660 674861 130 367.00 148.36 18.17Target

West EA21-290 5614662 674861 131 478.65 211.30 37.43Target

West EA21-291 5614660 674862 129 311.50 186.73 -9.43Target

North EA21-292 5614676 674928 -51 245.50 261.01 -6.47Target

North EA21-293 5614675 674931 -51 300.00 232.16 -1.09Target

North EA21-294 5614559 674879 -72 410.50 338.19 -50.15Target

North EA21-295 5614561 674880 -74 500.50 13.51 -69.79Target

North EA21-296 5614559 674877 -75 494.50 241.47 -70.74Target

Table 2: New Afton AI Targets Drill Assay Results

Estimated Target From To Interval Gold CopperDrill Hole True Area (m) (m) (m) Width (g/t) (%)

(m)

EA19-267 West 0 33 33 NA 0.06 0.01 Target

Geotechnical 33 35 2 1.7 25.20 0.01

35 98 63 NA 0.07 0.04

98 119 21 18.1 0.25 0.24

119 141 22 NA 0.07 0.07

141 155 14 12.1 0.24 0.08

155 165 10 NA 0.01 0.02

165 219 54 NA Pending results

219 229 10 NA 0.12 0.04

229 235 6 5.2 0.48 0.11

235 260 25 NA Pending results

260 282 22 NA 0.07 0.06

282 300 18 NA Pending results

300 315 15 NA 0.04 0.04

315 352 37 NA Pending results

352 360 8 NA 0.01 0.05

360 376 16 13.8 0.39 0.19

376 382 6 NA 0.02 0.01

382 442 60 NA Pending results

442 448 6 NA 0.08 0.02

448 530 82 NA Pending results

530 540 10 NA 0.02 0.03

540 579 39 NA Pending results

EA19-268 West 0 10 10 NA Pending Target results

Geotechnical 10 16 6 NA 0.03 0.04

16 24 8 7.6 0.97 1.27

24 30 6 NA 0.10 0.07

30 170 140 NA Pending results

170 192 22 NA 0.04 0.07

192 338 146 NA Pending results

338 420 82 NA 0.02 0.05

420 436 16 15.2 0.36 0.19

436 476 40 NA 0.04 0.04

476 488 12 11.4 0.35 0.04

488 506 18 NA 0.06 0.03

506 514 8 7.6 0.76 0.10

514 530 16 NA 0.03 0.01

530 554 24 22.7 0.81 0.07

Includes 550 554 4 3.8 2.72 0.25

554 576 22 NA 0.04 0.03

Estimated Target From To Interval Gold CopperDrill Hole True area (m) (m) (m) Width (g/t) (%)

(m)

EA19-268 West 576 582 6 5.7 0.49 0.05 Target

Geotechnical 582 612 30 NA 0.05 0.03

612 618 6 5.7 3.35 0.64

618 638 20 NA 0.01 0.01

638 650 12 11.4 1.15 0.03

650 670.56 20.56 NA 0.02 0.70

EA21-289 West 0 32 32 NA 0.06 0.01 Target

32 38 6 5.7 1.06 0.05

38 224 186 NA 0.05 0.02

224 228 4 3.8 0.78 0.01

228 242 14 NA 0.04 0.02

242 244 2 1.9 0.87 1.25

244 328 84 NA 0.03 0.05

328 362 34 32.3 0.34 0.18

includes 328 330.3 2.3 2.2 1.27 1.34

362 367 5 NA 0.02 0.01

EA21-290 West 0 478.65 478.65 NA 0.03 0.02 Target

EA21-291 West 0 42 42 NA 0.07 0.02 Target

42 60 18 17.8 0.31 0.01

60 311.5 251.5 NA 0.04 0.03

EA21-292 North 0 245.5 245.5 NA 0.01 0.01 Target

EA21-293 North Pending Target results

EA21-294 North Pending Target results

EA21-295 North Pending Target results

EA21-296 North Pending Target results

Table 3: Cherry Creek Drill Holes Collar Coordinates

Target Drill UTM_North UTM_East Elevation Total Azimuth Dip Hole Depth Area (m) (m) (masl) (degrees) (degrees) (m)

Silica CC20-001 5614059.97 672427.53 719.63 485.50 247.69 -46.86Hill

Silica CC20-002 5613456.05 673470.25 677.72 662.00 9.27 -48.16Hill

Beaton CC20-003 5616385.70 669095.08 703.70 574.00 230.03 -68.19

Silica CC20-004 5614062.41 672427.54 719.61 461.50 309.43 -47.37Hill

Silica CC20-005 5613998.52 672516.61 712.23 489.68 239.57 -60.23Hill

Silica CC20-006 5613997.46 672517.83 712.04 440.50 185.95 -75.35Hill

Beaton CC20-007 5616385.86 669098.03 704.07 414.00 152.48 -54.91

Silica CC20-008 5613454.78 673469.30 677.65 401.00 321.77 -51.54Hill

Silica CC20-009 5613796.00 672205.00 740.00 164.00 210.28 -65.73Hill

Silica CC20-010 5614178.22 672011.18 723.95 609.50 279.92 -46.73Hill

Beaton CC20-011 5616389.22 669098.41 704.12 425.29 47.99 -44.72

Silica CC20-012 5613796.00 672205.00 740.00 205.00 210.90 -84.94Hill

Silica CC20-013 5613804.18 672199.47 729.65 707.00 11.24 -61.17Hill

Silica CC20-014 5614176.50 672013.24 724.68 465.00 243.17 -57.21Hill

Silica CC21-015 5613437.92 672789.49 712.89 273.00 220.52 -57.20Hill

Silica CC21-016 5613437.26 672789.79 712.86 825.09 43.00 -51.63Hill

Beaton CC21-017 5617173.92 668675.48 640.09 752.33 202.33 -49.51

Silica CC21-018 5613438.42 672790.02 712.91 697.99 343.45 -60.52Hill

Beaton CC21-019 5617174.70 668676.86 640.11 750.00 156.27 -46.58

Silica CC21-020 5614179.00 672014.00 740.00 716.40 29.13 -82.07Hill

Note:drill holes from CC20-001 to CC21-0019 have been field surveyed after the drill hole completion, for CC21-020 no final field survey has been completed.

Table 4: Cherry Creek Drill Assay Results ( 0.2 g/t Au and/or 10 g/t Ag and interval as length down the hole)

From To Interval Gold Silver CuDrill Hole (metres) (metres) (metres) (g/t) (g/t) (ppm)

0.0 348.2 348.2 No significant results

348.2 349.6 1.4 0.01 20.7 149

349.6 406.8 57.2 No significant results

CC20-001 406.8 407.6 0.8 0.24 0.2 55

407.6 430.0 22.4 No significant results

430.0 432.1 2.1 0.83 1.5 9

432.1 485.5 53.4 No significant results

0.0 429.6 429.6 No significant results

CC20-002 429.6 431.0 1.4 0.00 13.5 174

431.0 662.0 231.0 No significant results

CC20-003 0.0 574.0 574.0 No significant results

0.0 395.5 395.5 No significant results

CC20-004 395.5 397.0 1.5 0.00 48.2 172

397.0 461.5 64.5 No significant results

CC20-005 0.0 489.7 489.7 No significant results

CC20-006 0.0 440.5 440.5 No significant results

CC20-007 0.0 414.0 414.0 No significant results

CC20-008 0.0 401.0 401.0 No significant results

CC20-009 0.0 164.0 164.0 No significant results

CC20-010 0.0 609.5 609.5 No significant results

0.0 243.7 243.7 No significant results

CC20-011 243.7 244.5 0.8 0.00 12.3 99

244.5 425.3 180.8 No significant results

0.0 166.0 166.0 No significant results

166.0 172.0 6.0 0.45 1.3 20

CC20-012 172.0 176.7 4.7 No significant results

176.7 178.0 1.3 0.28 1.1 41

178.0 205.0 27.0 No significant results

CC20-013 0.0 707.0 707.0 No significant results

0.0 386.0 386.0 No significant results

386.0 388.0 2.0 0.21 3.8 56

388.0 393.7 5.7 No significant results

CC20-014 393.7 395.2 1.5 0.32 1.3 19

395.2 423.1 27.9 No significant results

423.1 424.1 1.0 0.35 0.4 139

424.1 465 40.9 No significant results

0.0 248.0 248.0 No significant results

248.0 251.4 3.4 0.44 0.3 79

251.4 267.7 16.3 No significant resultsCC21-015 267.7 269.0 1.3 1.10 0.2 57

269.0 271.5 2.5 No significant results

271.5 273.0 1.5 0.21 0.3 72

CC21-016 0.0 825.1 825.1 No significant results

CC21-017 0.0 752.3 752.3 No significant results

0.0 361.0 361.0 No significant results

361.0 363.0 2.0 0.00 12.6 88

363.0 369.0 6.0 No significant results

CC21-018 369.0 371.0 2.0 0.00 18.0 97

371.0 672.5 301.5 No significant results

672.5 673.2 0.7 0.30 0.6 76

673.2 682.0 8.8 No significant results

682.0 683.0 1.0 0.32 1.3 86

683.0 684.0 1.0 23.00 5.5 89

684.0 698.0 14.0 No significant results

CC21-019 0.0 750.0 750.0 No significant results

CC21-020 0.0 713.8 713.8 No significant results

View source version on businesswire.com: https://www.businesswire.com/news/home/20210610005891/en/

CONTACT: Ankit Shah Vice President, Strategy & Business Development Direct: +1 (416) 324 6027 Email: ankit.shah@newgold.com